The Alfa 500 is an automatic L-bar POF shrink wrapping machine built for high-speed, continuous production lines. It seals and shrink-wraps products of unlimited length in clear polyolefin (POF) film, giving a tight, glossy, retail-ready finish at up to 100 pkg/min (max.). Built in Bursa by Edda, Turkiye's first manufacturer of horizontal stretch wrapping machines.
Products are fed into the L-bar sealing station, where the POF film is cut and sealed around the product on two sides in a single stroke, then carried through the shrink tunnel where heat shrinks the film tight against the product for a clear, glossy finish. Because the sealing and shrinking stages are separate, product length is unlimited and the line can run continuously at up to 100 pkg/min (max.).
| Feature | Value |
|---|---|
| Max. product height (H) | 150 mm |
| Min. product dimensions (W x H x L) | Unlimited x 350 x 150 mm |
| Max. film width | 600 mm |
| Max. film roll diameter | Ø 30 mm |
| Recommended film thickness | 10, 30 micron |
| Machine dimensions (W x H x L) | 4500 x 1500 x 1400 (h) mm |
| Vertical jaw length | 470 mm |
| Capacity | 100 pkg/min (max.) |
| Power supply | 380 V, 50/60 Hz, 3P+1N+1G (208/415/480 V optional) |
| Main motor power | 5 kW |
| Power incl. heat tunnel | 15 kW |
| Max. jaw height | 180 mm |
600 mm, on rolls up to Ø 30 mm diameter.
There is no upper limit on product length — only the product height and width are constrained by the machine's dimensions.
Up to 100 pkg/min (max.), depending on product dimensions.
380 V, 50/60 Hz, 3-phase with neutral and earth; total installed power (incl. heat tunnel) is 15 kW.
