The Admiral 500 is an automatic L-bar POF shrink wrapping machine from Edda's general-purpose range, covering product jaw lengths from 500 to 950 mm across the Admiral line. It seals and shrink-wraps products of unlimited length in clear POF film, giving a tight, retail-ready finish. Built in Bursa by Edda, Turkiye's first manufacturer of horizontal stretch wrapping machines.
Products are fed into the L-bar sealing station, where POF film is cut and sealed around the product on two sides in a single stroke, then carried through the shrink tunnel where heat shrinks the film tight against the product. Capacity on the 500 size is up to 60 pkg/min (max.).
| Feature | Value |
|---|---|
| Max. product height (H) | 150 mm |
| Min. product dimensions (W x H x L) | Unlimited x 400 x 150 mm |
| Max. film width | 600 mm |
| Max. film roll diameter | Ø 30 mm |
| Recommended film thickness | 10, 30 micron |
| Machine dimensions (W x H x L) | 3700 x 1500 x 1400 (h) mm |
| Vertical jaw length | 500 mm |
| Capacity | 60 pkg/min (max.) |
| Power supply | 380 V, 50/60 Hz, 3P+1N+1G (208/415/480 V optional) |
| Main motor power | 4 kW |
| Power incl. heat tunnel | 14 kW |
| Max. jaw height | 180 mm |
600 mm, on rolls up to Ø 30 mm diameter.
There is no upper limit on product length — only height and width are constrained by the machine size chosen.
Up to 60 pkg/min (max.), depending on product dimensions.
All four sizes (500/650/850/950) share the same L-bar sealing and shrink-tunnel design; larger sizes handle taller, wider products at a correspondingly lower maximum speed.
