The Spinner 600 S BN is an automatic horizontal orbital wrapper that applies both an air bubble film layer and a stretch film layer in a single pass, for door frames, mouldings, laminate flooring and small aluminium, steel and wood profiles that need extra surface protection. Built in Bursa by Edda, Turkiye's first manufacturer of horizontal stretch wrapping machines.
Minimum product size is 100 x 18 x 550 mm (W x H x L), with no upper limit on product length.
The product travels along the belt conveyor (up to 12 m/min, 100 kg/m load capacity) through the ring, which applies an air bubble film layer (up to 450 mm wide, 600 mm reel diameter) followed by a stretch film layer (up to 170 mm wide, 230 mm diameter), rotating at 20 to 85 rpm. The cutting and welding unit works between 50 and 150 C and accepts PE film, PE air bubble film or PVC film.
| Product length | Unlimited |
| Min. product size (W x H x L) | 100 x 18 x 550 mm |
| Max. conveyor speed | 12 m/min |
| Ring rotation speed | 20-85 rpm |
| Stretch film | Up to 170 mm wide, 230 mm diameter, 76 mm core |
| Air bubble film | Up to 450 mm wide, 600 mm reel diameter, 20-76 mm core |
| Total power | 3.3 kW |
| Power supply | 380 V, 50/60 Hz, 3P+N+PE |
| Machine size (W x H x L) | 1600 x 1520 x 3300 mm |
| Weight | 630 kg |
What is the difference between the Spinner 600 S and the Spinner 600 S BN?
The BN version adds an air bubble film layer under the stretch film, applied in the same pass, for products that need extra surface protection.
Which films does it use?
PE film, PE air bubble film or PVC film, with a cutting and welding system operating between 50 and 150 C.
What power supply does it need?
380 V, 50/60 Hz, three-phase with neutral and earth; total installed power is 3.3 kW.
